恒泰源聚氨酯

我们专注于鞋底用聚氨酯

ZG-P-6570/ZG-I-5012

产品编号
所属分类
劳保鞋料
数量
-
+
库存:
Product description
参数

牌号( Shop sign): ZG-P-6570/ZG-I-5012

双密度劳保鞋底原液

Dual density PU Resin for labor protection shoes (safety shoe) sole

1. 特性:中低硬度,中高密度

Characteristic: Medium and low hardness, medium and high density.

2. 用途:适用于单密度及双密度劳保鞋的生产。

Characteristic: Applicable to the production of single density or double density safety shoes

3. 原液特性Typical properties of PU Resin

品   名

Name of products

外   观

Appearance

粘   度Viscosity(Pa·s/50℃) 密   度Density(g/cm3/40℃) 包  装Package(kg)
ZG-P-6570 白色或淡黄,液状无异物White or pale yellow, liquid, no foreign material 0.50-0.80 1.16-1.20 18
ZG-I-5012 透明液体无异物Transparent liquid, no foreign material 0.20-0.40 1.18-1.20 20

参考发货配比(Reference shipments ratio):A/B=30/24(桶)

Reference shipments ratio: A/B=30/24 (barrel)

 

4. 成型条件及物性值(Typical processing parameters& Typcal properties):

测试项目Test item 参考物性值Physical properties
鞋底成型密度Molded density(g/cm3 大底:0.50-0.70
中底:0.25-0.65
硬度(A型)Hardness(type A) 大底:  45-85
中底:  30-55
拉伸强度Tensile strength(MPa) 300~500
伸长率Elingation(%) 3.0~5.0
NBS耐磨Wear(%) ≥10%
自由泡密度Free rise foam density(g/cm3 大底:0.50~0.60
中底:0.18-0.24
耐折性(常温)(4万次裂口长度,mm)Folding(room temperature)(40,000 gap length mm) <8

●配合比率是以最佳配比值为基础,此配比值会随添加的颜料助剂种类和添加量不同而变化。

With the best ratio is based on the ratio, the ratio of value added with The type and quantity of paint additives vary.

●自由泡沫密度会依季节(温度,湿度)的不同而变化。

the free foam density according to the seasons (temperature, humidity) vary

●脱模时间会随成型品厚度的增加而延长。

Ejection time with the increase of the thickness of molded extension

●耐折条件:屈挠角度为 90度,频率为80次/min*4万次。

Folding conditions: angle of 90 degrees of flex, frequency of 80 times / min * 4 million

● 以上数据仅作参考,具体数据以实际操作为准。如需其他物性指标,请与我公司联系。

Data listed above are just for reference .The detail data are subjected to practical operation.If other requests for physical properties,please contact us.

 

未找到相应参数组,请于后台属性模板中添加

地址:

浙江省温岭市工业园区一号路科技园

河南恒泰源新材料有限公司

河南省平顶山市叶县尼龙城产业集聚区,沙河五路与化工一路交叉口

       

EN    PT
ES    RU

Copyright © 浙江恒泰源聚氨酯有限公司 版权所有  浙ICP备20019453号 

中文 |EN | PT | ES | RU

搜索
搜索