恒泰源聚氨酯

我们专注于鞋底用聚氨酯

>
>
>
低硬度低密度聚醚型鞋垫鞋底原液 ZG-P-5006/ZG-I-5002

低硬度低密度聚醚型鞋垫鞋底原液 ZG-P-5006/ZG-I-5002

产品编号
数量
-
+
库存:
Product description
参数
浙江恒泰源聚氨酯有限公司生产的低硬度低密度聚醚型鞋垫鞋底原液,主要适用于聚醚鞋垫的生产。
牌号( Shop sign): ZG-P-493/ZG-I-338
 
低硬度,低密度,聚醚型鞋垫鞋底原液
 
1.特性:低硬度,低密度,聚醚型
 
 
2.用途:适用于聚醚鞋垫的生产
 
 
 
3. 原液特性
 
品名 外观 粘度(Pa·s/50℃) 密度(g/cm3/40℃) 包装(kg)
ZG-P-493 白色或淡黄,液状无异物White or pale yellow, liquid, no foreign material 0.30-0.70 1.00-1.05 18
ZG-I-338
透明液体无异物Transparent liquid, no foreign material 0.10-0.30 1.00-1.05 20
 
参考发货配比(Reference shipments ratio):A/B=33/20(桶)
 
Reference shipments ratio: A/B=33/20(barrel)
 
测试项目Test item 参考物性值Reference physical properties
鞋底成型密度Molded density of sole(g/cm3 0.3-0.4
硬度(A型)Hardness (type A) 10-25
拉伸强度Tensile strength(MPa) 2.0-3.0
伸长率Elongation(%) 350-550
NBS耐磨NBS abrasion resistance(%) ≥10%
自由泡密度Free foam density(g/cm3 0.22-0.36
耐折性(常温)(4万次裂口长度,mm)Folding endurance (room temperature)(40,000 gap length mm) <8
 
4. 成型条件及物性值(Molding conditions & physical properties):
 
 
●配合比率是以最佳配比值为基础,此配比值会随添加的颜料助剂种类和添加量不同而变化。
 
Matching ratio is based on the optimal matching value which will vary with the category and additive amount of paint additives added.
 
●自由泡沫密度会依季节(温度,湿度)的不同而变化。
 
Free foam density will vary with the seasons (temperature, humidity).
 
●脱模时间会随成型品厚度的增加而延长。
 
Stripping time will be extended with the increase of the thickness of moldings.
 
●耐折条件:屈挠角度为 90度,频率为80次/min*4万次。
 
Folding endurance conditions: bending angle is 90 degrees and the frequency is 80 times / min * 40 thousand times
 
● 以上数据仅作参考,具体数据以实际操作为准。如需其他物性指标,请与我公司联系。
 
Data listed above is just for reference. The specific data is subjected to the practical operation. If other physical properties are required, please contact us.
未找到相应参数组,请于后台属性模板中添加

地址:

浙江省温岭市工业园区一号路科技园

河南恒泰源新材料有限公司

河南省平顶山市叶县尼龙城产业集聚区,沙河五路与化工一路交叉口

       

EN    PT
ES    RU

Copyright © 浙江恒泰源聚氨酯有限公司 版权所有  浙ICP备20019453号 

中文 |EN | PT | ES | RU

搜索
搜索